sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) PID hash table entries: 1024 (order: 0, 4096 bytes) Kernel command line: console=ttyS0,115200 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw Built 1 zonelists in Zone order, mobility grouping on. Memory policy: ECC disabled, Data cache writeback Machine: Marvell Kirkwood (Flattened Device Tree), model: Iomega Iconnect

Loading Device Tree to 0fb13000, end 0fb18fff. Reserving fdt memory region: addr=700000 size=3000 UBIFS: reserved for root: 0 bytes (0 KiB) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: mounted UBI device 0, volume 0, name 'rootfs' UBI: number of PEBs reserved for bad PEB handling: 40 UBI: VID header offset: 512 (aligned 512) UBI: logical eraseblock size: 129024 bytes UBI: physical eraseblock size: 131072 bytes (128 KiB) * 4 oz cold Coffee an irish coffee mug filled * 1/2 oz Galliano Pour all ingredients into Please press Enter to activate this console.Д«usyBox v1.19.4 ( 18:25:46 UTC) built-in shell (ash)Д®nter 'help' for a list of built-in commands. Press the key and hit to enter failsafe mode VFS: Mounted root (jffs2 filesystem) on device 31:2. JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. jffs2_build_filesystem(): erasing all blocks after the end marker. jffs2_build_filesystem(): unlocking the mtd device. jffs2_scan_eraseblock(): End of filesystem marker found at 0x260000 Creating 4 MTD partitions on 'orion_nand': NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) CPU: VIVT data cache, VIVT instruction cache Image Type: ARM Linux Kernel Image (uncompressed) # Booting kernel from Legacy Image at 06400000. This is a bootlog from first start of OpenWrt: NAND erase: device 0 offset 0x500000, size 0xfb00000 NAND write: device 0 offset 0x100000, size 0x400000ДЇilename 'openwrt-kirkwood-jffs2-128k.img'. If your iConnect does not bring up (blue diode don't blink), something went wrong and it is bricked.Дon't be scary there is a way to bring it up, you must use JTAG connector, see article Flashing U-Boot with JTAG. NAND write: device 0 offset 0x0, size 0x100000

NAND erase: device 0 offset 0x0, size 0x100000 TFTP from server 192.168.1.5 our IP address is 192.168.1.200ДЇilename 'openwrt-kirkwood-iconnect-u-boot.kwb'. Iconnect => tftp 0x0800000 openwrt-kirkwood-iconnect-u-boot.kwb Tftp 0x0800000 openwrt-kirkwood-iconnect-u-boot.kwb Set tftp server and iConnect IP addresses.

Iomega mhndhd default ip address